Stripped AR15 Lower (RDIAS) Compatible

Description

These AR-15 lowers are made for The Spirit of 76 using only the best US made forgings available. So many domestic AR manufacturers are now using foreign sourced forgings that often have soft spots in them, but these are made of the best 7076 T6 in the world. These foreign sourced forgings still allow the final product to be ‘Made in the US‘ but there is a quality difference. Combined with a Hard-Coat Anodized Mil 8625 Type 3 Class 2 – Matte Black finish and the extra features and you have a really top class product! No more marring of the receiver when putting in the bolt stop, as it is held in place by an easy to install screw instead of a roll pin. Uppers and lowers will fit together as tight as you would like, with the built in nylon tipped upper receiver tensioning screw that will let you control the fit. And the rear takedown pin is held in place by a set screw, so no more crushed detent springs or lost springs if you change out the end plate. These small features make your build easier and nicer, and only are found on upper end receivers, like this one.

Report problem