Otter Creek Labs Milkman

Description

Otter Creek Labs Milkman – Low Backpressure 9mm Suppressor – *** 1.375″ Threaded

4473 transfers on all suppressors SBR’s and SBS’s. Schedule an appointment to check it out in person at our Salt Lake City location.

No long winded description here, just straight and to the point. DMLS 3D printed from grade 5 titanium, coming in at 8.8 oz and *** compatible, the Milkman is optimized from the ground up for 9mm rifles/PCC/SMG. It’s the perfect balance of sound and back pressure to keep things quiet and keep your guns running cleaner with no gas to the face. AR9, Uzi, MP5, Scorpion, MCX, AKV, B&T – it doesn’t matter. The milkman was made to rule the 9mm rifle world. Due to the unique flow path it runs much cooler than other 9mm rifle suppressors and because it’s *** threaded, you can use any ***-compatible 3 lug, direct thread adapter, or QD mounting system of your choice. It’s full auto-rated, so feel free to get after it with any full auto SMG or FRT. No barrel length restrictions on 9mm. Pistol/handgun/booster use is NOT covered under warranty and it is not recommended. If you’re looking for a suppressor for your Glock look somewhere else but if you’re looking for a suppressor for your rifle/smg/pcc you can just go ahead and stop looking now, you’ve found it.

Specs

Length: 6”

Diameter: 2” on the thiccc part, 1.5” on the thin part

Weight: 8.8 oz

Material: Titanium

Thread pitch: ***/1.375×24

What comes in the box? 

Suppressor

Tube clamp

Stickers

NO MOUNT IS INCLUDED. You must buy and supply your own mount. For mounting to tri-lug barrels, we recommend the Resilient Titanium Tri-Lug Adapter. 

This suppressor is for 9mm-ish sized projectiles only: 375/38 special, 350 Legend, 9mm, 32 acp, 8.6 blk, 338 ARC, etc.

Report problem